+618 8347 0911
SALES     -     CALIBRATION     -     SERVICE     -     HIRE

Products / Agencies
Service / Calibrations
Newsletter Archive
News / Community
Contact Us
User Login
Instrument Solutions Australia maintain a high level of NATA certified calibration & test equipment for short or long term hire at competitive rates. Calibrators & test equipment brands available include, Beamex, Fluke, GE Druck, Meriam, Magnum Pro, Crystal to name just a few. Calibrators include:
  • Multifunction calibrators
  • Pressure calibrators
  • Temperature calibrators
  • Loop calibrators
  • Dry block calibrators
  • HART communicators
  • Calibration pumps
  • Humidity calibrators
  • Air flow anemometer calibrators

Below is a small sample of the calibration and test equipment available for hire. Contact us today to discuss your calibration hire needs.

Multifunction Calibrators

Beamex MC5 Multifunction Calibrator


All you need for field calibration. The all-in-one documenting multifunction calibrator. The modular construction of MC5 provides flexibility for user-specific requirements. The MC5 is the worlds most versatile multifunction calibrator.


Main Features:

Calibration capabilities for pressure, temperature, electrical and frequency signals
Documenting - communicates perfectly with calibration software
IP65-rated dust and waterproof casing
Internal and/or external pressure modules


Beamex MC4 Documenting Process Calibrator


The Beamex® MC4 is a compact-sized documenting process calibrator. Being a multifunction calibrator, the MC4 is suitable for calibrating various process parameters, such as pressure, temperature and electrical signals. As the MC4 is a documenting calibrator, calibration results are automatically stored in the MC4’s memory. In addition, instrument data can be sent from computer to MC4 and calibration results can be uploaded from the MC4 to a computer using Beamex® CMX Calibration Software.


Main Features:

Automated and documented calibrations can be made quickly and easily
Calibration capabilities for pressure, temperature, electrical and frequency signals
Compact size and design
Documenting – communicates with Beamex calibration software

Fluke 743B & 744 Multifunction Calibrator


The Fluke 744 does the work of several tools - sourcing, simulating and measuring pressure, temperature, and electrical signals in one rugged, hand-held device.
A large range of external pressure modules of varying pressure ranges are available to be combined with this calibrator

Fluke 725 Multifunction Calibrator


The Fluke 725 Multifunction Process Calibrator is a powerful, yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter.

Small, streamlined shape makes it easy to carry

Rugged, reliable design stands up to field use

Easy to read measure/source screen lets you view input and output simultaneously

Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors and transmitters

Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters

Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules

Source mA with simultaneous pressure measurement to conduct valve and I/P tests


Temperature Calibrators

ISA TC-600 Dry Block Temperature Calibrator



The ISA-TC600 Dry Block Calibrator is versatile, robust, accurate and designed for use in harsh environments.

The ISA-TC600 is probably the easiest calibrator to use in the world. Plug the unit in, press ↑ for temperature up and ↓ for temperature down, it’s that easy.

Temperature calibration made simple!


Ambient to 600  ̊ C


316 Stainless Steel


Digital 10mm Green LCD


Control ± 0.15  ̊ C


0.1  ̊ C


Ambient to 600  ̊ C in approx 20 minutes


100mm Deep x 24mm Diameter (removable core)


240V AC 1350W




200mm H x 200mm D x 120mm Wide (excludes handle)

Meriam M130 Thermocouple Temperature Calibrator

The M1 Series of handheld calibrators from Meriam Process Technologies combines form, fit and function to deliver precision measurement for field, plant or lab use.

Main Features:
Measure and source thermocouples
Large, easy to read display with backlight
Shirt pocket convenience
Cold junction compensation
T/C simulation (manual or auto)
3 programmable auto step routines (Units, T/C Type, LRV, URV, STEPS & DWELL TIME)
3 programmable auto ramp routines (Units, T/C Type, LRV, URV, STEPS UP/DOWN TIME, DELAY)
Auto step simulation (0-100% or 25% increments) with definable LRV & URV

Pressure Calibrators

Magnum Pro Pressure Calibration Pumps


The Magnum Pro has been synonymous with quality by using some of the finest materials such stainless steel, non- oil based lubricants and an anodized finish. The Magnum Pro uses a unique patented design, utilizing a Schrader valve instead of a needle valve, dual O-rings on all pistons as well as other enhancements are just some of the reasons why these pumps have earned the reputation of being indestructible.


Main Features:

Magnum Pro Combo Pneumatic Calibration Pump Model# MVP-600

  • Range: Vacuum 28"Hg to Pressure 600psi (40Bar)

Magnum Pro Hydraulic Calibration Pump Model# M-10

  • Range: 0 to 10,000psi (700 Bar)

Magnum Pro Low Pressure Pump Model# MP-P

  • Range: 0 to 100psi (7 Bar)

Magnum Pro Vacuum Pump Model# MP-V

  • Range: 0 to -28"Hg 


 HART Communicators

Meriam MFC 4150 HART Communicator


Meriam's MFC 4150 HART® Communicator is the latest HART communicator from Meriam Process Technologies. HART field devices can be configured and trimmed using the MFC. The MFC is a full function HART Communicator with time-saving features that optimize commissioning, configuration and maintenance operations.

MFC 4150 supports all HART devices at the Universal and Common Practice command levels plus a large and growing list of devices at the Device Specific command level. View our field device list by going to www.meriam.com and selecting Available DOFs.

MFC4150X Intrinsically Safe ATEX Certification by DEMCO





Testo 625 Humidity & Temperature Calibrator


The compact instrument with built-in humidity probe head for measuring air moisture and temperature. The large 2 line display shows humidity, wet bulb temperature or dewpoint as well as temperature.


Main Features:

Displays temperature and relative humidity / wet bulb temperature / dewpoint

Max./min. values

Hold button to freeze readings

Display light


Series 471 Digital Thermo-Anemometer


Main Features:  

Service: Clean, dry air.

Range: Field selectable 0-500, 0-1500, 0-5000, 0-15000 FPM (see Catalog Page).

Accuracy: Depending on range (see Catalog Page) @ 59 to 86°F (15 to 30°C). Outside this range add 0.11% per °F (0.2% per °C).

Temperature Limits: Probe: 0 to 200°F (-18 to 100°C).

Ambient: 32 to 104°F (0-40°C).

Display: 4-1/2 digit 0.4" high.

Resolution: 1 FPM/0.1 MPS.

Response Time: 15 seconds.

Power Requirements: 9 volt alkaline battery, included.

Probe: 5/16" (8.13 mm) diameter probe with integral hand grip and 6 ft. (15.2 cm) coiled cord. Length of probe: Model 471-1=10" (25.4 cm); Models 471-2 and 471-3= 33" (83 cm) extended.


© Developed By B Singler 2007

hit counter