+618 8347 0911
SALES     -     CALIBRATION     -     SERVICE     -     HIRE

 
Home
Products / Agencies
Service / Calibrations
Hire
Newsletter Archive
News / Community
Contact Us
User Login
 
Products / Agencies

ISOMAG: in line electromagnetic flow meters from 3 mm up to DN2000 mm, compact or separate, with PP, Ebonite or PTFE linings. The range includes insertion flow meter also for mounting under pressure. Converters equipped with graphic display and internal data logger, they can give digital, analogical and serial outputs. Profibus, Hart and wireless GPRS protocols available.

OIML R49 and MID certification available.
 

Special versions such as:

  • sensors all in stainless steel304/316 (flanged up to DN2000 and wafer up to DN400)
  • high temperature sensors up to 180°C.
  • in line high pressure versions up to 250 bars, insertion up to 64 bars
  • FLOWIZ, the battery powered magnetic flow meter, with wireless communication
  • Integrated pressure transmitter optional
  • Two wires system
  • Energy BTU meter
  • PID controller

SENSORS / FLOW TUBES

ISOMAG MS 1000 Wafer Sensor

The MS 1000 ‘wafer’ sensor is easy to be mounted thanks to the absence of flanges; it can be installed by inserting it between counter flanges of various type (UNI, DIN, ANSI, JIS etc.).
It is suited for all the principal applications, in particular for the markets of water and HVAC and in cooling plants.
Body material: Carbon Steel and SS
Nominal diameter: from ND 25 to ND 400
Flow range: 0…4.500 m3/h
Nominal pressure: from PN 16 to PN 40
Wide choice of process connections.
Liquid temperature: from -20 to +150°C
Wide choice of lining materials.
Wide choice of electrodes materials.

   

ISOMAG MS 2500 Flanged Sensor

The MS 2500 ‘flanged’ sensor , for universal utilization, suited for all the application and flow ranger, is available with the widest diameters range.
Body material: Carbon Steel and SS AISI304/316
Nominal diameter: from ND 25 to ND 2000
Flow range: 0…113.000 m3/h
Nominal pressure: from PN 6 to PN 250
Process connections: flanges according to all international standards.
Liquid temperature: from -20 to +180°C
Wide choice of lining materials.
Wide choice of electrodes materials.
Accuracy and repeatability data are according to the chosen converter (see converters section).
 
   

ISOMAG MS 2410 Sanitary Sensor

The MS 2410 ‘sanitary’ sensor is specific for food or pharmaceutical plants. It is resistant to the vacuum (absolute 200 mbar at 100°C), ideal for CIP cycles, 3A and FDA certificates.
Body material: SS AISI304/316
Nominal diameter: from ND 3 to ND 100
Flow range: 0…280 m3/h
Nominal pressure: from PN 16 to PN 25
Wide choice of process connections.
Liquid temperature: from -20 to +150°C
Lining materials: PTFE
Wide choice of electrodes materials.
Accuracy and repeatability data are according to the chosen converter (see converters section).
   

ISOMAG MS 501 - MS 600 Microflow Sensors

The MS 501 ‘microflux’ sensor is the smallest instrument of the series, with a wide range of process connections for all the applications.
Body material: SS AISI304/316
Nominal diameter: from ND 3 to ND 20
Flow range: 0…12.500 l/h
Nominal pressure: from PN 16 to PN 40
Wide choice of process connections.
Liquid temperature: da -20 a +150°C
Lining material: PTFE
Wide choice of electrodes materials.
Accuracy and repeatability data are according to the chosen converter (see converters section).
 
   

ISOMAG CIAO Patented Wrapped Plastic Sensor

The plastic CIAO sensor with patented connection system and closing through metallic clamps, is ideal for applications where volumetric counters are normally used, with all the advantages of the electromagnetic flow-meter.
Body material: Polyurethane
Nominal diameters: from DN 25 to DN 80
Flowrate: 0…180 m3/h
Lining materials: Polyurethane
Nominal pressure: from PN 6
Process connection: metallic clamps
Liquid temperature: from 0 to +50°C
Wide choice of electrodes materials.
Accuracy: +/- 2% of the read value.
   

ISOMAG MS 3770 - MS 3800 Insertion Sensor

The MS 3800 ‘insertion’ sensor is available with accessories for mounting on for pressurized pipelines with diameters from 200 to 8000 mm.
It is ideal for temporary measuring campaigns, monitoring and leakage detection purposes.
Sensor material: SS AISI304/316
Wide choice of pipe diameters.
Nominal pressure: from PN 25
Process connections: 1” threaded muff (with exclusion ball valve).
Valve material: bronze ball valve.
Liquid temperature: from -20 to +150°C
Lining materials: PTFE
Electrodes materials: AISI316
Accuracy: +/- 2% of the read value (whatever converter is used).
 
CONVERTERS / TRANSMITTERS

ISOMAG ML 51 Converter

The ML51 “2 wire loop powered” system converter is used in the water and HVAC markets and in industrial applications where basic performances are required.
Accuracy: ± 0,5% of the read value.
Repeatability: ± 0,5%
Without display.
Programming trough PC.
It can be coupled with all the ISOMAG sensors up to DN 1000 except the MS 4000.
 

ISOMAG ML 110 Converter

The ML110 converter is mainly used in the water market, HVAC and in industrial applications where average requirements are needed. Accuracy: ± 0,8% of the read value (optional ± 0,4% of the read value). Repeatability: ± 0,2% With or without display. Programming through 3 internal keys or PC. Galvanic separation: all inputs and outputs are separated one each other and with the power supply. Housing material: Glass fibre nylon. Programmable functions: low flow rate cut-off, bidirectional, double range, peak cut-off, empty pipe detection, alarm limit and so on. It can be coupled with all Isomag sensors with the exception of the MS4000.

ISOMAG ML 210 Converter

The ML210 converter is used in all those markets where high performances, communication buses, flexibility on the number of inputs/outputs, batch applications, data storing are required.
Accuracy: ± 0,2% of the read value.
Repeatability: better than ± 0,1%
With or without display.
Programming trough 3 internal keys or PC.
Galvanic separation: all inputs and outputs are separated between each others and with the power supply.
Housing material: Aluminium (AISI304 on request).
Programmable functions: low flow rate cut-off, bidirectional, dual range, peak cut-off, empty pipe, alarm limit, batching, low flow rates error curve linearization, etc.

Available optional modules for Fieldbus, Profibus DP, MODBUS and HART
It can be coupled with all the ISOMAG sensors up to DN 1000 except the MS 4000 and CIAO.

ISOMAG ML 211 - 212 Converter

The ML211 converter is a calories counter which keeps the main features of the ML210 base converter model plus:
5 variables measure capability: flow, energy, Tinput; Toutput, ΔT
n. 2 additional inputs from Pt100 (on request from Pt500 o Pt1000).
Possibility of programming the specific heat and volumetric mass of the measured liquid.
Bidirectional measure (for calories and frigories).
2 energy totalizers.
Available optional modules for Fieldbus DP and MODBUS
It can be coupled with all the ISOMAG sensors up to DN 1000 except the MS 4000 and CIAO.

ISOMAG FLOWIZ Converter

The FLOWIZ™ converter allows the powering of any Isomag sensor plus one or two optional pressure sensors through internal lithium batteries.
The ML 255 FLOWIZ™ can also be powered by mains power supply (optional); batteries, in this case, work as a back up in order to avoid any loosing in the measuring in case of power supply failure.
The system allows measuring performances meeting the requirements of the CEN EN 14154, ISO 4064 and OIML R49 normative.
The ML 255 FLOWIZ™ allows the wireless transmission through GPRS of all flow and pressure data and it is equipped with a four bands internal modem.
This converter has an internal data logger able to store flow and pressure data with a jogging capability up to 16 Gbytes.
Accuracy: ± 0,4% of the read value.
Repeatability: better than ± 0,5%
With or without display.
Programming trough 3 internal keys or PC.
Housing material: Aluminium, AISI304
It can be coupled with all ISOMAG™ sensors.
 

ISOMAG ML4F1 Converter

The ML4F1 converter is specific for fast ‘batching’ application (frequency up to 400 Hz).
Accuracy: ± 0,2% of the read value.
Repeatability: better than ± 0,1%
Programming trough PC.
Galvanic separation: all inputs and outputs are separated between each others and with the power supply.
Housing material: AISI304
Programmable functions: low flow rate cut-off, bidirectional, dual range, peak cut-off, empty pipe, alarm limit, batching with automatic presetting, etc.
It can be coupled with all the ISOMAG sensors up to DN 1000 except the MS 4000 and CIAO.

SERVICE & CALIBRATION

ISOCAL Verificator

 

ONSITE, ONLINE, VERIFICATION / CALIBRATION

The ISOCAL verificator permits insitu verification of ISOMAG Electromagnetic flowmeter and eliminates the expensive and time-consuming necessity of meter removal and reinstallation.
Additionally ISOCAL provides automated faultfinding capabilities helping to find and prevent possible meter malfunctioning.
Unit supplied with ISOCAL INTERFACE software for complete control via PC and USB cable connection.
Compatibility:
•MS2500 and MS1000
•ML51: All firmware versions
•ML110: Above firmware version 3.50
•ML210: Above firmware version 3.50
•ML211: Above firmware version 3.50
•ML4-F1: All firmware versions
•ML250: Above firmware version 4:xx
Sensor test functions: coil resistance, coil impedance, insulation
Converter test functions: current to coils, flow rate simulation, 4-20 mA, frequency/pulse

 
 
© Developed By B Singler 2007

hit counter