FMT200-D
Sensyflow FMT200-D is for direct mass and standard volume flow measurement of compressed air and biogas. The measurement is independent of operating pressure and temperature. With turndown ratio of 1:100, it allows metering and leakage detection together in one instrument.
Features
The flowmeter sensor uses the hot film anemometer working principle. This method allows for direct measurement of the gas mass flow. As a result, the normally necessary pressure and temperature compensation and, thus, additional measuring points and the compensation computer can be omitted.
Sensyflow FMT200-D plus the corresponding pipe components are installed in a defined way and locked in place as a component of the measuring pipe.
The flowmeter includes the sensor unit and the evaluation electronics which directly provides a linearized output signal. The device is calibrated and ready for operation. An LCI adapter is used to parameterize the output signal.
- Threaded pipe connections
- DN 25 to 80 (1 to 3 in.)
- Output 0/4 to 20 mA
- directly from sensor head
- High measuring accuracy
- < 2 % of rate
- Low pressure drop
- 10 mbar (1kPa)