MFT4000
The MFT 4000 Digital Calibrator is a base unit for pressure calibration work with selected NIST traceable sensor modules & integral voltage/current meter. The MFT 4010 Digital Calibrator with HART® is a base unit for modules and full device specific HART® communications. Quick Cal displays HART® PV and AO along with MFT’s NIST traceable measurements. User can identify needed trim(s) and access the trim function(s) from same display. Smart Trim allows selection of analog or digital trims without navigating through menu trees. Documenting included. Documenting memory stores up to 200 HART® configuration files and over 100 calibration results (as-found & as-left data [up to 21 points each], time/date info, tag). Communicate with PC via DB-9 connector.
Available modules include differential, gauge, vacuum and absolute pressure as well as temperature calibration, and voltage/current calibration. A voltage and current meter is integral to the base unit. All HART® field devices can be configured, polled, and trimmed using HART® communications. Device Specific commands for supported devices are included with the MFT.
Each unit includes: CE Mark, Test Lead Kit, HART Leads (Model 4010), Batteries, Universal Power Adapter, RS-232 Serial Cable and Users Manual.
Features
All-In-One Tool – Takes the place of multiple handheld instruments, simplifies workload and improves productivity.
Automation for HART® Field Devices – Calibration is automated through auto setup of the calibrator based on the device settings;
digital trims automate the device adjustment steps.
Calibration Types Supported – Pressure, t/c, RTD, I/P, P/I, Switch, Loop and mA/V for conventional or HART® transmitter or local indicators.
Document As found/As left Calibration
Results – Create calibration procedures on the handheld or download them from compatible device management software. Save results to non-volatile memory.
Field Updates – Uses Internet downloads to update and add capability / HART® support. Modules – Select from a variety of positive-lock measurement modules for excellent versatility.
Field Recertification – Sensor modules and integral V / I can be recalibrated for zero, span, & linearity via the MFT.
User Interface – 2.1” x 2.1” display, four soft keys (definitions change with mode requirements) and eight hard keys provide user
interface. Display is configurable for 1 to 4 simultaneous measurements.
User Convenience – Auto shut off, Damping, Min/Max value capture, display Hold, sensor Zero, direct Contrast adjustment.
Security Lockout – Lockout specific MFT settings or all at one time.
Diagnostics – MFT 4010 self-tests upon power up and upon installation of sensor modules. Advisories are posted on the display.
Dedicated DOF Memory – Memory for 500 HART® device drivers. DOFs current as of 2013